CHRONOCLASSIC SPEEDOMETER

CHRONOCLASSIC SPEEDOMETER

Chronoclassic speedometer 0-200 km/h or mph, black dial and body, green LCD, with german ABEThe motogadget Chronoclassic speedo is an analogue speedometer with many additional features in a classic round casing. Technically identical to the motoscope classic speedo, it brandishes a black dial and a white indicator. The design resembles old Smiths brand instruments. A technically identical instrument is also available with a white dial (please refer to the motoscope classic speedo) or as analogue rev counter (please refer to the analogue tacho CLASSIC series).Specifications:Mounting diameter: 80 mmOverall diameter (bezel): 85 mmDepth without cable fitting: 34 mmWeight: approx. 230 gMounting: 3 x M4 threaded holePower consumption (in operation): approx. 200 mA (depending on load)Power consumption (in standby): 0 mAOperating voltage: 9-18 VOperating temperature: -20 °C +80 °CFeature:Speedometer (analogue, indicator) = 0 – 200 km/h or mi/h, on top on LCDTrip meter = 999 km or mi max.Total distance (adjustable) = 250000 km or mi max.Journey time display = 0 – 99:99:99 h/min/sRev counter (on LCD) = 0 – 20000 rpmrpm threshold, adjustable (int. LED and ext. gear shift flash) = 0 – 20000 rpmOn-board voltage display = 9 V – 18 VNEW! Low voltage warning = LED blinks if on-board voltage drops below approx. 11V - replacement for battery charge status lightAir temperature* (optional instead of water temp.) = -20 - 80 °C / -4 - 176 °F with high-/low warningWater temperature* (optional instead of air temp.) = 40 - 120 °C / 104 - 248 °F with high-/low warningOil temperature* = 40 - 160 °C / 104 - 320 °F with high-/low warningOil pressure* = 0 - 8 bar / 0 - 116 psi with high-/low warningTimekeeping = 0 - 100 km/h or 0 - 60 mi/h 0.0 – 99.9 sCurrent acceleration = (-20.0) – 20.0 m/s2Average speed = 0 – 350 km/h or mi/hMax. speed = 0 – 350 km/h or mi/hMax. rpm = 0 – 20.000 rpmMax. positive acceleration = 0 – 20.0 m/s2Max. negative acceleration = 0 – (-20.0) m/s2Gear indicator = N, gear 1 - 6Green indicator LED = Neutral (N)Yellow indicator LED = Turn signal left, rightBlue indicator LED = High beamRed indicator LED = Different warning functions external (e. g. oil pressure switch), internal (rpm, temperature, pressure, voltage)Output external gear shift flash light = Switched power 1.4 A max.Delivery contents:Instrument with approx. 55 cm connector cablecomplete wiringfusespeedometer sensor M5 x 0,5 fine-pitch thread with 150 cm connector cable2x magnetmini push-button3x M4 screw (stainless steel)detailed installation and operating instructionsPlease note: That temperature and pressure sensors have to be ordered separately (refer to Accessories).