This RAM high strength composite cradle is designed to hold the following GPS units: Garmin GPS 60, GPSMAP 60 / 60C / 60CS / 60Cx / 60CSx. The backside is prepared for connection with diamond base plate. Material: High Strength Composite Colour: black Weight: 0.11 lbs Note: displayed devices are not part of the delivery. Delivery includes Garmin cradle only!
GoPro Hero and other action cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM MOUNT began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. The RAM MOUNT item RAP-B-202U-GOP1 consists of a 1 inch diameter rubber ball, connected to...
The RAM MOUNT Medium Tough-Claw - RAP-B-404U - is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 1 inch to 1.875 inch outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in...
The RAM MOUNT Aqua Box housings offer the best protection against water and dirt for a range of electronic handheld devices. The front side is covered with a transparent thick foil. In the middle is a small lock attachment (not included). The rear side is prepared to accommodate an oval base plate (trapeze).Dimensions:Small:AQUA BOX Internal dimensions:...
The RAM MOUNT Aqua Box housings offer the best protection against water and dirt for a range of electronic handheld devices. The front side is covered with a transparent thick foil. In the middle is a small lock attachment (not included). The rear side is prepared to accommodate an oval base plate (trapeze).Dimensions:Small:AQUA BOX Internal dimensions:...
The RAM MOUNT Aqua Box housings offer the best protection against water and dirt for a range of electronic handheld devices. The front side is covered with a transparent thick foil. In the middle is a small lock attachment (not included). The rear side is prepared to accommodate an oval base plate (trapeze).Dimensions:Small:AQUA BOX Internal dimensions:...
RAM MOUNTS Sealed Enclosure Aqua Box Pro 10 - for small Devices
RAM Mounts Base Ball• RAM-B-349-1U - has an M10-1.5 grub screw. The diameter above the thread is 14,3 mm and the distance from the ball to the thread is 10,5 mm. The grub screw itself is approx. 15 mm long.• RAM-B-349U - has an M10-1.12 threaded pin. The diameter above the thread is 14.5 mm and the grub screw is 10.15 mm long.Material: powder-coated...
RAM MOUNT 1' ball with a 3/8-16 inch threaded post. Material: Powder Coated Marine Grade Aluminum. Ball Size: 1 Inch. Colour: black. Weight: 0.06 lbs.
RAM MOUNTS 1 inch Ball with 1/4 Inch Thread Post
This RAM Mounts base ball (B ball) has a 3/8 -16 grub screw and comes with washer. This basic ball is often used for motorcycles, replaces existing screws and offers a connection for the construction of a RAM Mounts bracket.Material: powder-coated aluminiumHeadless pin: 3/8 -16, length: 10.16 / 12.7 mmBall diameter: 25.4 mm (1 inch, B-ball)Colour:...
This RAM Mounts base ball (B ball) has a 3/8 -16 grub screw and comes with washer. This basic ball is often used for motorcycles, replaces existing screws and offers a connection for the construction of a RAM Mounts bracket.Material: powder-coated aluminiumHeadless pin: 3/8 -16, length: 10.16 / 12.7 mmBall diameter: 25.4 mm (1 inch, B-ball)Colour:...
RAM Mounts Base Ball• RAM-B-349-1U - has an M10-1.5 grub screw. The diameter above the thread is 14,3 mm and the distance from the ball to the thread is 10,5 mm. The grub screw itself is approx. 15 mm long.• RAM-B-349U - has an M10-1.12 threaded pin. The diameter above the thread is 14.5 mm and the grub screw is 10.15 mm long.Material: powder-coated...
RAM MOUNTS Suction Cup incl. Diamond Base Plate with 1 inch B-Ball
This RAM MOUNT base plate contains a 1 inch rubber ball connected at right angles to a 2x1.7 inches rectangular base. This mount has pre-drilled holes at each corner of the base plate. The centers of the pre-drilled holes are in 1/4 inch from the edge of the base. The distances between the centers of the holes are 1.5 and 1.2 inches. This adapter/base is...
The RAM Aqua Box cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics as well as use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be...
This RAM MOUNT high strength composite unit cradle - RAM-HOL-SPO3U - is designed to hold the SPOT Connect / SPOT Satellite Communicator devices. The backside of the cradle is prepared to connect to a diamond base plate. RAM MOUNT cradle - RAM-HOL-SPO3U - features:Open access to all electronic ports Patented roller design for super smooth placement and...
The round RAM Mounts base plate with B-ball (1 inch) forms the basis of many mounting solutions. It is suitable for mounting on smooth, vertical or horizontal surfaces and has the AMPS perforated grid.Material: Powder-coated aluminumBall Diameter: 25.4 mm (1 inch, B Ball)Diameter footprint: 63.5 mm (2.5 inches)Hole pattern: AMPSColor: BlackWeight: approx....
Simply attach the RAM double ball base to the handlebar mount for brakes and clutches and the possibilities are endless. The rubber ball-and-socket joint technology allows almost infinite adjustment and perfect viewing angles. High-quality materials ensure that your electronic device is safe, protected and within reach. RAM's patented design also absorbs...
Simply attach the RAM double ball base to the handlebar mount for brakes and clutches and the possibilities are endless. The rubber ball-and-socket joint technology allows almost infinite adjustment and perfect viewing angles. High-quality materials ensure that your electronic device is safe, protected and within reach. RAM's patented design also absorbs...
RAM MOUNTS Base Arm for Motorcycles with 1 inch B-Ball and 11 mm hole
The universal composite camera base - RAP-B-366U - consists of a 1-Inch diameter rubber ball, connected at right angles to a round plate with a centered 1/4-Inch-20 thread. The plate adds extra support to the thread, this by allowing the camera to rest on the plate, creating a stable connection with the camera. The male 1/4 inch-20 threaded steel stud...
The RAM camera base contains a 1.5 inch rubber ball that is connected to a 2.5 inch diameter round base. Also, included is a 3/8 inch-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8 inch-16 threaded steel stud will connect to any standard female thread found on camcorders and...
RAM MOUNT 1 Inch ball with 1/4 Inch (diameter) threaded bar for several mountings. Material: Powder Coated Marine Grade Aluminum. Ball diameter: 1 Inch (2.54 cm). Threaded bar diameter: 0.25 Inch (0.64 cm). Length threaded bar: 2.52 Inches (6.4 cm). Colour: : black (powder coat). Weight: 0.08 lbs.
This RAM MOUNT base fits cleanly over your existing brake/clutch reservoir cover with the 1-inch ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Material: Powder Coated Marine Grade Aluminum Ball Size: 1 Inch Rubber Ball Colour:...
Material: Powder Coated Marine Grade Aluminum. Ball Size: 1 Inch Rubber Ball. Base Diameter: 2.5 Inches. Color: Black Powder Coat. Weight: 0.15 lbs.
RAM MOUNTS Motorcycle Brake/Clutch Reservoir Cover Base, 1 inch Ball centered
RAM MOUNT Flex Adhesive Base with 1 inch B-Ball - RAP-B-378U
The RAM MOUNT Small Tough-Claw - RAP-B-400U - is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625 inch to 1.5 inch outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more...
The RAM MOUNT short double socket arm (RAM -B-201U-A), has a socket at both ends that accommodates 1-inch ball bases (B size). RAM MOUNT socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 2.38 inches Socket-To-Socket Length: 2 inches Ball Size: 1 inch (B) Material: Powder Coated Marine Grade...
The RAM MOUNT V shape base (RAM-B-108BU) consists of a 1 inch diameter rubber ball connected at a right angle to a v-shaped base. This base accommodates rails from 1.0 inch to a maximum of 2.1 inch in diameter. To mount the base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on...
RAM MOUNT drink cup holder with 1 inch ball. Material: Powder Coated Marine Grade Aluminum, High Strength Composite. Ball Size: 1 Inch. Color: Black. Weight: 0.43 lbs.
This RAM MOUNT high strength composite cradle (RAM-HOL-TO11U) is designed to hold the following TomTom devices: TomTom GO 2535 M LIVE TomTom GO 2535 TM WTE The unit cradle features:Easy access to ports Pocket for factory vehicle dock Patent pending roller design for super smooth placement and removal of the GPS The cradle includes a set of two nuts and...
The RAM MOUNT double socket connector - RAM-B-230U - allows you to connect two sockets together and maintain a flexible mount. Ideal if the your mount arm is just too short. Material: Powder Coated Marine Grade Aluminum. Ball Size: 1Inch. Length: 2.58'. Color: Black Powder Coat. Weight: 0.09 lbs.
RAM MOUNT offers a wide variety of motorcycle mounts. A great addition to this already extensive product line is the Twist & Tilt base (RAM-B-360U) for mirror constructions on motorcycles. Made of die cast marine grade aluminum, durability wonÂ’t be a concern. The patented rubber ball dampens shock and vibration helping to maintain the performance of the...
The RAM long double socket arm (RAM -B-201U-C), has a socket at both ends that accommodates 1-inch ball bases (B size). RAM socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 6 inches Socket-To-Socket Length: 5.1875 inches Ball Size: 1 inch (B) Material: Powder Coated Marine Grade Aluminum...
RAM MOUNTS X-Grip Post Caps (replacement) - Set of 4 pcs.